ISOTECH TRUrac Model 847
Brand :
ISOTECH
Categories :
Thermocouple Referencing
The TRUrac is a 0°C or elevated temperature thermocouple reference system mounted in a 19” chassis. It has been developed for situations where ambient temperature can be up to 65°C.
- Rack Mounted
- Large Capacity
- Approved for Power Station Use
Specifications
-
Power
100 Watts typical 100-130 or 208-240 VAC 50/60Hz
-
Weight
24kg
-
Capacity
Up to 100 Double Junction Channels
-
Stability
±0.03°C, errors introduced by thermocouple loading can be removed by adjusting controller offset.
-
Accessories
935-14-54: Platinum Resistance Thermometer, includes UKAS calibration at 0.01°C. 935-17-32: Fan Filter – recommended for high dust environments.
-
How to order
Should be specified uniquely on each order. Please discuss your exact requirements with us before ordering.
-
Ambient Range
2°C to 65°C
-
Alarm facilities
Non-latching relay rated 5 Amps 240V
-
Stabilising Time
10 minutes from 44°C
-
Operating Temperature
0°C (or 45° to 70°C)
-
Input/Output Connections
Klippon Terminals type 1.5 AKZ
-
Dimensions – 50 to 100 Channels
Height 400mm Width 483mm Depth 312mm
Thermocouple Reference System
The TRUrac is a 0°C or elevated temperature thermocouple reference system mounted in a 19” chassis. It has been developed for situations where ambient temperature can be up to 65°C.
The reference temperature is normally set to 0°C or between 45°C and 70°C. For other temperatures please contact Isotech.
An alarm will be activated should the reference temperatures deviate by more than 0.2°C.
High Capacity – up to 200 Thermocouple Junctions
Inside the rack case is a high stability thermal block which has a capacity of up to 100 thermocouple channels, the probe wires being terminated at the rear of the unit on rail mounted screw terminals.
To special order a second thermal block may be fitted to allow a capacity of 200 channels in a single unit.
The customer simply connects their thermocouple wires and copper output wires to these terminals. All the thermocouple cold junctions are inserted into a metal oven block which is accurately temperature controlled.
