ISOTECH Large Volume Liquid Bath Model 820
Brand :
ISOTECH
Categories :
Secondary Laboratory
If you have a large number of sensors to calibrate then this economically priced stirred liquid bath is the solution. The 820 bath has been introduced to provide a liquid calibration bath with a large volume.
- Large volume for calibration of a number of sensors,
- Good comparison accuracy ±0.01°C
Specifications
-
Model
820
-
Power
1kW 108-130 or 208-240Vac 50/60Hz
-
Safety
Compliant to CE Regulations
-
Volume
185 x 140 x 300mm (15 litres)
-
Weight
17kgs
-
Dimensions
Width 240mm, Depth 378mm, Height 645mm overall.
-
Uniformity
0.005°C – between corners at 100°C depth
-
Accessories
820/01 Standard Resistor Holder, 820/02 Standard Aluminium Equalising Block, 820/02S Special Drilling Equalising Block, 915/07 Medium Viscosity Oil 40°C to 180°C, 915/09 VH Temperature Oil 50°C to 288°C, 932-19-72 Standard Resistor Oil
-
Heating time
50°C to 200°C < 145 minutes (VH Oil)
-
How to order
820 Large Volume Liquid Calibration Bath. Please specify voltage required.
-
Communications
Includes serial interface, PC Cable and Software.
-
Temperature Range
30°C to 200°C
-
Absolute Stability
±0.003°C (direct in water, 50°C), ±0.020°C (direct in VH Oil, 200°C)
If you have a large number of sensors to calibrate then this economically priced stirred liquid bath is the solution.
The 820 bath has been introduced to provide a liquid calibration bath with a large volume. This is to allow the bath to be used with many temperature probes simultaneously immersed in the bath or with accessories. It may also be used to maintain standard resistors at a constant temperature.
The liquid in the bath is heated to the set temperature and circulated by a propeller system.
The Aquarium is of robust construction and the liquid is contained in a stainless steel insulated enclosure which has a calibration volume 185mm long x 140mm wide x 300mm deep.
Refer to ‘Liquid Selection Guide’ on page 73 for information on liquids and important Health and Safety Information.
