Tesa DC probe, ± 2 mm, 4,3 mm bolt travel, radial cable
Brand :
TESA TECHNOLOGY
Categories :
DC axial probes
, Measuring probes
• PROBE - Provided with an electronic box which converts the signal to obtain a direct current output signal - Measuring bolt mounted on a ball bearing - Separate guiding from the housing so that the movement of the measuring bolt moves easily even if the probe is not clamped appropriately - Guiding is insensitive to any radial force exerted on the measuring rod - 8 mm diameter probe housing, can be clamped over its entire length • MEASUREMENT - Used for direct connection to a computer unit or interface equipped with an analogue input - The measuring force can be adjusted by changing the spring (depending on the probe model) - The inserts (measuring inserts) can be replaced or exchanged • PROTECTION - Degree of protection IP65 according to IEC 60529 - The guides are effectively protected against penetration of liquids (oils) or solids (dust) by sealing bellows of high elastic quality • OTHER Special versions on request: - Sensitivity: 2 V/mm, 5 V/mm, 10 V/mm - Output: 0 V to +10 V (max +10 V)
Specifications
| Standard | DIN 32876 |
| Max. perm. errors | L in mm 0,2 + 3,5 x (L x L) µm |
| Repeatability | 0,1 µm |
| Coefficient of linear expansion | 0,2 µm/°C |
| Material | Fixing shank: nickel plated Measuring bolt: stainless steel Protection bellow: Viton® Ball insert: tungsten carbide |
| Dimensions | Fixing shank: Ø 8 mm Insert thread: M2,5 Ball insert Ø 3 mm Cable: 2 m Connector: 5p DIN45322 |
| Degree of protection | IP65 |
| Weight | Mobile weight: 6 g |
| Power supply | Stabilised supply voltage: ± 15 V Consumption: 15 mAh Adjustable load: > 1kΩ Output voltage: ± 2 V |
| Remark(s) | CAD files available on request Downloadable data sheets on www.tesatechnology.com |
| Included in delivery | Declaration of conformity |
| Part numbers |
|---|
