Kyoritsu KEW 2413R LEAKAGE CLAMP METER
Brand :
Kyoritsu
Categories :
Clamp Meter
• Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires (3 phases) together for leakage current measurement.
• True RMS enables an accurate measurement for distorted waveforms.
• Measurement from mA up to AC 1000A
• Frequency filter switch to eliminate the effect of the harmonics.
• 2 way analogue output terminal
• Resolution 0.1mA
Specifications
-
Output
Waveform : AC200mV against the maximum value of each range (1000A range is 100mV) Recorder : DC200mV against the maximum value of each range (1000A range is 100mV)
-
Weight
Approx. 570g (including battery)
-
Dimension
250(L) × 130(W) × 50(D)mm
-
AC A (WIDE)
200mA/2/20/200/1000A ±1.8%rdg±5dgt (50/60Hz) (200mA/2/20A) ±2.0%rdg±5dgt (50/60Hz) (200A, 0 - 500A) ±5.0%rdg (50/60Hz) (501 - 1000A)
-
Crest factor
3.0 or less
-
Power source
6F22 (9V) × 1 *Continuous measuring time: Approx. 60 hours
-
AC A (50/60Hz)
200mA/2/20/200/1000A ±2.5%rdg±5dgt (200mA/2/20A) ±3.0%rdg±5dgt (200A, 0 - 500A) ±5.5%rdg (501 - 1000A)
-
Conductor size
Ø68mm max.
-
Frequency response
40Hz - 1kHz
-
Applicable standards
IEC 61010-1 CAT III 300V Pollution degree 2 IEC 61010-2-032
-
Included Accessories
9094 (Carrying Case) 6F22 × 1 Instruction Manual
-
Optional Accessories
7073 (2WAY Output Cord)
