FLIR X6980 SLS™ High-Speed LWIR Science-Grade Camera
Brand :
Teledyne FLIR
Categories :
High Performance Cameras
The FLIR X6980 SLS is an extraordinarily fast longwave IR camera designed for scientists and engineers who need to capture high-speed imagery for accurate thermal analysis and custom radiometric measurements. This thermal imaging camera combines 640 × 512 resolution from the SLS detector with the fastest high-speed frame rates to offer the shorter snapshot speeds and wider temperature bands needed to record crisp stop motion images of high-speed events. With a four-position motorized filter wheel and support for FLIR motorized focus lenses, the X6980 SLS will provide high quality recordings, save time, and mitigate frustration in dynamic acquisition environments.
High Speed, High Sensitivity
Capture full 640 × 512 imagery at up to 1004 Hz, with integration times that are 10x shorter than MWIR InSb cameras (ambient temperatures)
Multiple Software Interfaces
Stream thermal data directly to a computer to view, record, and analyze with FLIR Research Studio
On-Camera RAM and SSD Recording
Save up to 26,000 frames of data directly to on-camera memory or up to 15 minutes to included 512 GB SSD
Specifications
-
NETD
40 mK typical
-
Focus
Motorized (compatible w/manual)
-
Filtering
4-Position motorized warm filter wheel, standard 1-inch filters, user swappable
-
Resolution
640 × 512
-
Detector Type
Strained layer superlattice (SLS)
-
Dynamic Range
14-bit
-
Detector Pitch
25 µm
-
Spectral Range
7.5 µm (lower), 11.5–12.5 µm (upper)
-
Camera f-number
f/2.5
-
Integration Time
Programmable: 270 ns to ~full frame
-
Frame Rate [Full Window]
Programmable: 0.0015 Hz to 1004 Hz
-
Optional Temperature Range [with band matched optics]
ND1: 250°C–1500°C (482°F–2732°F) ND2: 500°C–3000°C (932°F–5432°F)
-
Standard Temperature Range [with band matched optics]
-20°C to 350°C (-4°F to 662°F)
-
NETD
40 mK typical
-
Focus
Motorized (compatible w/manual)
-
Overlay
Customizable (ability to toggle off)
-
Palette
Selectable 8-bit
-
Filtering
4-Position motorized warm filter wheel, standard 1-inch filters, user swappable
-
Resolution
640 × 512
-
Operability
99% typical
-
Pixel Clock
355 MHz
-
Video Modes
HD-SDI: 720p@50/59.9Hz, 1080p@25/29.97Hz; SD-SDI: 480i@60Hz, 576i@50Hz
-
Digital Zoom
1x, Auto (best fit)
-
Readout Type
Snapshot
-
Detector Type
Strained layer superlattice (SLS)
-
Dynamic Range
14-bit
-
Readout Modes
Asynchronous integrate while read, Asynchronous integrate then read
-
Detector Pitch
25 µm
-
Lens Interface
FLIR FPO-M (4-tab bayonet, motorized)
-
Sensor Cooling
Closed cycle rotary
-
Spectral Range
7.5 µm (lower), 11.5–12.5 µm (upper)
-
Standard Video
HDMI, SDI
-
Camera f-number
f/2.5
-
Subwindow Modes
Flexible windowing down to 32 × 4 (steps of 32 columns, 4 rows)
-
Available Lenses
Manual (7.5–12 µm): 17 mm, 25 mm, 50 mm, 100 mm, 200 mm Motorized (7.5–12 µm): 17 mm, 25 mm, 50 mm, 100 mm, 200 mm
-
Image Time Stamp
Internal IRIG-B decoder clock TSPI accurate time stamp
-
Integration Time
Programmable: 270 ns to ~full frame
-
Direct to SSD Recording
Yes, removable 512 GB SSD included
-
On Camera Image Storage
RAM (volatile): 16 GB, up to 26,000 frames full frame SSD (user-removable/non-volatile): ~15 minutes of ~800 Hz recording with included 512 GB SSD (more than 2 hours possible with 4 TB SSD purchased separately)
-
Frame Rate [Full Window]
Programmable: 0.0015 Hz to 1004 Hz
-
Radiometric Data Streaming
Simultaneous Gigabit Ethernet (GigE Vision), Camera Link,CoaXPress® 1.1, dual 5 Gb links
-
Close-up Lenses/Microscopes
1x
-
Accuracy
≤100°C: ±2°C (±1°C typical), >100°C: ±2% of reading (±1% typical)
-
Automatic Gain Control
Manual, Linear, Plateau equalization, ROI, DDE
-
Ambient Drift Compensation [with factory cal]
Yes
-
Optional Temperature Range [with band matched optics]
ND1: 250°C–1500°C (482°F–2732°F) ND2: 500°C–3000°C (932°F–5432°F)
-
Standard Temperature Range [with band matched optics]
-20°C to 350°C (-4°F to 662°F)
-
Synchronization Modes
Sync In, Sync Out, Tri-Level Sync
-
Power
24 VDC (<50 W steady state)
-
Mounting
2 × 1/4 in. –20 / 1 × 3/8 in. –16 / 4 × #10 –24 / Side: 3x 1/4 in. –20 (each side)
-
Operating Temperature Range
-20°C to 50°C (-4°F to 122°F)
