FLIR A6260 SWIR Camera with InGaAs Detector
Brand :
Teledyne FLIR
Categories :
High Performance Cameras
The FLIR A6260 SWIR camera offers superior sensitivity and dynamic range paired with the flexibility of customized windowing and integration times. This InGaAs camera is very linear in the 0.9 to 1.7 µm sensing waveband, making it the perfect tool for high temperature thermal measurements and applications that require measuring through standard glass. The A6260 offers control over settings such as integration time, while allowing you to synchronize and trigger to external events and devices.
Fully Customizable
Tailor controls to unique applications through customizable integration times, frame rates, synchronization, and triggering.
Crisp, High-Resolution Images
The 327,680 (640 x 512) pixel detector offers three user-selectable, 75x factor gain states for imaging bright and low-light scenes.
Accurate Temperature Measurement
Factory or user-calibrate the A6260 to measure temperatures above 400°C when optimized for the 0.6 - 1.7 µm waveband.
Specifications
-
Focus
Manual
-
Resolution
640 × 512
-
Detector Type
FLIR indium gallium arsenide (InGaAs)
-
Spectral Range
0.9 – 1.7 µm
-
Camera f-number
Variable using lens iris (lens fixed at f/4 with cal)
-
Integration Time
50 µsec to ~full frame (3.2 msec w/factory calibration)
-
Pixel Size [Square]
15 µm
-
Filter Holder [Warm]
Behind lens mount for standard 1-inch diameter filters
-
Frame Rate [Full Window]
Programmable; 0.0015 Hz to 125 Hz (180 Hz burst)
-
Optional Temperature Range [with band matched optics]
600°C to 1500°C/1112°F to 2732°F (ND2); 700°C to 2500°C/1292°F to 4532°F (ND3)
-
Standard Temperature Range [with band matched optics]
400°C to 1200°C/752°F to 2192°F (ND1)
-
Overlay
Fixed configuration, can be turned off
-
Pixel Clock
100 MHz
-
Video Modes
SDI: 720p@50/59.9, 1080p@25/29.9
-
Readout Type
Snapshot
-
NEI [Typical]
8.4E9 Photons/sec/cm2 (Low Gain), 2.9E9 photons/sec/cm2 (Med Gain)
-
Readout Modes
Asynchronous integrate while read, asynchronous integrate then read
-
Sensor Cooling
Single Stage TE Cooler, 30C FPA setpoint
-
Standard Video
SDI
-
Camera f-number
Variable using lens iris (lens fixed at f/4 with cal)
-
Subwindow Modes
640 x 512, 320 x 256, 160 x 128, flexible centered windowing down to 32 × 4 (steps of 32 columns, 4 rows)
-
Available Lenses
16 mm, 25 mm, 35 mm, 50 mm, 100 mm
-
Image Time Stamp
Yes
-
Integration Time
50 µsec to ~full frame (3.2 msec w/factory calibration)
-
Pixel Size [Square]
15 µm
-
Standard Video Zoom
Automatic, variable
-
Filter Holder [Warm]
Behind lens mount for standard 1-inch diameter filters
-
Noise Floor [Typical]
Low Gain: 350e, Med Gain: 56e
-
On Camera Image Storage
None
-
Radiometric Data Streaming
Gigabit Ethernet (GigE Vision)
-
Close-up Lenses/Microscopes
No microscopes available
-
Thermal Sensitivity_NETD [typical]
N/A
-
Ambient Drift Compensation [with factory cal]
Yes
-
Optional Temperature Range [with band matched optics]
600°C to 1500°C/1112°F to 2732°F (ND2); 700°C to 2500°C/1292°F to 4532°F (ND3)
-
Standard Temperature Range [with band matched optics]
400°C to 1200°C/752°F to 2192°F (ND1)
-
Size [L x W x H ] w/o Lens
216 × 102 × 109 mm (8.5 × 4.0 × 4.3 in.)
